Handwheel does not turn or is tight Objective Handwheel does not turn or is tight Procedure CAUTION The handwheel on the machine should turn freely. By forcing the hand wheel to turn, you could do …

The machine is in a bind and cannot turn freely. Follow these steps to loosen the hand wheel: 1. Turn power switch off position. 2. Remove the needle in the machine. 3. Turn hand wheel toward the back …

How to oil the needle bar 1. Select one needle bar at a time from the embroidery screen. 2. Turn the handwheel counterclockwise bringing the needle bar to its lowest position. 3. Put one drop of oil, as …

- Turn the handwheel to check that the feed dogs move smoothly and do not contact the edges of the slots in the needle plate. If the steps are not completed in this manner it may cause issues when …

- After adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may …

When the sewing machine is started or the handwheel is turned after winding the thread around the bobbin, the machine will make a clicking sound; this is not a malfunction.

Check the Feed Dogs 1. Stop your machine and turn off the power. 2. Turn the handwheel until the needle is in the up position. 3. Check the feed dogs. - If the feed dogs are too high or too low, it could …

Images may differ depending on the model, but the overall process is the same. 1. Raise the needle using one of the following methods: - Turn the handwheel toward you (counterclockwise) so that the …

The machine was manufactured with the necessary amount of oil applied to ensure correct operation, making periodic oiling unnecessary. If problems occur, such as difficulty turning the handwheel or an …

If this happens, lower the upperlooper by turning the handwheel, remove the lowerlooper thread from the upperlooper, and re-thread the upper looper from the tension disc. Threading the lowerlooper Run …